|
|
|
Rostra
Comfort Seat™ Lumbar Support |
Frequently asked questions
How long does it take to install the Lumbar Support?
The Lumbar Support has universal application and is easy to install.
Estimated installation time is approximately 1 hour or less. As a service to customers who buy their lumbar support from
us, Rostra can also provide the name of an installer in their area. Installation
is estimated to cost $150-$200 per seat.
Will I need to remove the seat?
No. The Lumbar Support can be installed without removing the seat. The
seat cover needs only to be pulled up, not removed.
Will I have to cut the upholstery?
No cutting or stitching is required.
What is the difference between a "front mount" and
a "rear mount"?
A "front mount" fits between the foam and upholstery. A "rear
mount" fits behind the foam.
Is the lumbar support adjustable?
Yes. It can be adjusted according to the driver's preference.
Where
does the switch go?
The switch can be mounted along the side of the seat or on the center
console depending on the type of vehicle.
Lumbar Support Warranty
36 MONTH/36,000 MILE LIMITED WARRANTY
Rostra Precision Controls, Inc. (the Company) warrants to the original
retail purchaser of this product that should this product or any part
thereof, under normal use and conditions, be proven to have defective
material or workmanship within 36 months or 36,000 miles of the original
purchase, such defect(s) will be repaired or replaced (at the Company’s
option) without charge for the parts. This warranty does not apply to
batteries or normal wear and tear associated with the Product.
BACK TO
LUMBAR SUPPORT PAGE
| |
|
Rostra Comfort
Heat™ seat heater | | Frequently Asked
Questions
How long does it take to install the Seat Heater?
The Seat Heater has a universal application and is easy to install.
Estimated installation time is approximately 1 hour or less. As a service to customers who buy their Comfort Seat seat
heater from us, Rostra can also provide the name of an installer in their
area. Installation is estimated to cost $150-$200 per seat.
Will I need to remove the seat?
No. The Seat Heater can be installed without removing the seat. The
seat cover needs only to be pulled up, not removed.
Will I have to cut the upholstery?
No cutting or stitching is required.
Is the heat adjustable?
Yes. It can be adjusted according to the driver's preference with a
high or low setting.
Where does the switch go?
The switch can be mounted along the side of the seat or on the center
console depending on the type of vehicle.
Comfort Seat Warrantly
36 MONTH/36,000 MILE LIMITED WARRANTY
Rostra Precision Controls, Inc. (the Company) warrants to the original
retail purchaser of this product that should this product or any part
thereof, under normal use and conditions, be proven to have defective
material or workmanship within 36 months or 36,000 miles of the original
purchase, such defect(s) will be repaired or replaced (at the Company’s
option) without charge for the parts. This warranty does not apply to
batteries or normal wear and tear associated with the Product.
BACK TO
SEAT HEATER PAGE
|
Copyright © 2006-2010 Allscion.Com, Accessories Haven LLC. All Rights Reserved. Accessories Haven
(Allscion.Com) cannot be responsible for errors published online. Some information published has been provided by the manufacturer and or by corporations. Accessories Haven
(Allscion.Com) tries to maintain accuracy. Accessories Haven (Allscion.Com) recognizes all manufacturer's trademarks and or trade names herein and disclaims any proprietary
interest in their use.
|
|
|
|
